How To Apply Iron Ons

1.Lay out the fabric. Place the t-shirt (or other cloth to which the image will be transferred) on a
hard, flat surface, and smooth out any wrinkles with the iron.The work surface should be heat
resistant and should be large enough to accommodate the entire area of the transfer with a
little room to spare.
2.Place the transfer image-side down on the fabric. Put the transfer on the cloth precisely
where you want the image to be. Be sure you have the image facing the fabric.
3.Place brown paper inside the shirt directly under the transfer paper. Unless you want the image
to be printed on both sides of a shirt (if that's what you're transferring the image to), you'll need to
put something between the front and back.
4.Iron on the transfer . Carefully read the instructions given with the transfer paper. Set the iron to
the designated temperature, and wait for it to warm up. Move the iron in large circles on top of the
transfer paper. Start by focusing on the outside of the image, and gradually move toward the
center.Be sure to apply adequate pressure for an adequate amount of time for ten seconds (see the
transfer paper instructions), but keep the iron moving to prevent scorching.
 
5.Wait for the image to cool. Turn off the iron when finished and let the image cool for a few minutes.

6.Remove the backing from the transfer paper. Gently peel the backing off of the fabric.

logos size